Keri Systems Doors.NET with Multiple Hardware Platforms - Manual (Page 3)

Using Multiple Hardware Platforms in Doors.NET
Application Note
Page 3 of 8 P/N: 01268-001 Rev. B
2.0 Access Groups
When using multiple concurrent hardware platforms Doors.NET allows each hardware platform/
gateway type to access its total number of available access groups. It does not limit access groups to
the lowest common denominator.
Example – A system with both PXL and NXT hardware platforms/gateways allows only the first
access group to be assigned per cardholder on PXL controllers, but it allows the first through eighth
access groups to be assigned per cardholder on NXT controllers.
Table 4: Access Group Limitations
Gateway
Type
PXL NXT
Mercury
Powered
NXT
Standard
Mercury
ASSA
Aperio
ASSA
WiFi/
POE
Ingersoll
Rand
Number of
Access
Groups
unlimited unlimited unlimited unlimited unlimited unlimited unlimited
Access
Groups per
Cardholder
per
Controller
8
a
a. PXL access groups can have 8 access groups per cardholder as long as the access groups do not cross each
other or include the same controllers.
8
32
b
b. The factory default is 8, but can be configured to up to 32.
32
b
32
b 8
32
a