Kenton Mono(supplied prior to mid 1990) - Manual (Page 2)

C Receive channel 1 [Bottom C on DX-7] Midi note 36 (24h)
Db " " 2
D " " 3
Eb " " 4
E " " 5
F " " 6
Gb " " 7
G " " 8 Selecting a receive channel
Ab " " 9 will automatically put the
A " " 10 Midi into omni off mode.
Bb " " 11 That is, it will receive on
B " " 12 the selected channel only.
C " " 13
Db " " 14
D " " 15
Eb " " 16
E Not used
Master reset (G) sets all
F Omni on mode (default) settings to their default
Gb Not used values. Also sends all notes
G Master reset (see note) off code through midi. Press
Ab Not used
and hold down this key and
A Ignore received master reset then also press top C.
Bb not used - -
B not used - -
C
not used - - [Middle C] Midi note 60 (3Ch)
Db not used - -
D not used - -
Eb not used - -
E not used - -
F not used - -
Gb not used - -
G not used - -
Ab not used - -
A not used - -
Bb not used - -
B not used - -
C
not used - -
Db not used - -
D not used - -
Eb not used - -
E not used - -
F not used - -
Gb not used - -
G not used - -
Ab not used - -
A not used - -
Bb not used - -
B not used - -
C
not used - -
Db not used - -
D mod wheel on (default)
Eb mod wheel off
E pitch bend on (default)
F pitch bend off
Gb after touch on (default)
G after touch off
Ab send velocity information to filter (default)
A send nothing to filter (off)
Bb send controller 4 information to filter
B send aftertouch to filter
C ENTER KEY - Press and release. [Top C] Midi note 96 (60h)