Resetting the pro kadi to factory defaults, Specifications – Kenton Pro-KADI MkII User Manual
Page 10
10
Turning the PRO KADI on whilst holding down all three push buttons will return the unit’s settings to
default values. `Fd` will momentarily be displayed when this has been done.
Power on the PRO KADI whilst holding the INC and DEC buttons pressed and the software revision
[43xx] and build number [00xx] will be displayed. Releasing the buttons will revert to the normal
operational mode.
Power Input
9-15V DC (not supplied)
Power
100mA, 2.1mm plug (centre negative)
MIDI
In, Thru
Digital output
KADI / 13 Triggers
Analogue outputs
Clock (0-5v)
Sync 24 on 5 pin DIN socket
Weight
600g
Dimensions
167 x 97 x 40 mm
Non-volatile memory EEPROM (no back-up battery required)
WARRANTY
The PRO KADI comes with a 12 month (from purchase date) back to base warranty, (i.e. the
customer must arrange and pay for carriage to and from Kenton Electronics).
Brookfarm House,Station Road, South Wimbledon, London,SW19 2LP, UK
Tel: +44 (0)20 8544 9200 Fax: +44 (0)20 8544 9300
e-mail : [email protected] www : http://www.kenton.co.uk/
rev# 4301_115 e. & o. e.
4
TH
February 2002
RESETTING THE PRO KADI TO FACTORY DEFAULTS
DISPLAYING THE SOFTWARE VERSION
SPECIFICATIONS