Kenton Pro-2000 MkII - Manual (Page 21)

20
SPECIFICATIONS
Power;
230v AC 50Hz (170v - 260v) or 115v AC 50/60Hz (85v - 130v) - See note below.
6 Watts
Dimensions;
280mm x 132mm x 42mm
Weight;
2.5Kg
CONNECTIONS
Inputs;
Power Socket (3 pin IEC)
MIDI In (5 pin 180 degree DIN type)
4 push buttons
Outputs;
MIDI Out, Thru (5 pin 180 degree DIN type)
Sync24 (5 pin 180 degree DIN type)
Clock Pulse (3.5mm mono minijack)
6 Auxiliaries (3.5mm mono minijack)
2 Control Voltage outputs (3.5mm mono minijack)
2 Gate outputs (3.5mm mono minijack)
Expansion port - optional (15 pin High Density D or 8 pin Mini Din)
LCD 2x16 backlit
5 LED indicators
Accessories;
Operating Manual, Power cable
Optional Accessories; DCB port with cable (either 14 pin IEEE or 20 pin bump polarised)
KADI/WASP port with cable (either KADI or WASP cable)
Pair of ears for rack mounting
Note
The Kenton Electronics Pro-2000 mkII MIDI-CV converter has a built in mains transformer factory set to 230 volts AC 50Hz unless
otherwise marked. There is an internal switch to select 115 volts AC if required. Ensure that this adjustment is made by
competent service personnel only.
Warranty
The Pro-2000 mkII comes with a 12 month (from purchase date) back-to-base warranty, (i.e. customer must arrange and pay
for carriage to and from Kenton Electronics).
www.kentonuk.com
Kenton Electronics Limited
Brookfarm House, Station Road, South Wimbledon, London, SW19 2LP, UK
Tel: +44 (0)20 8544 9200 Fax: +44 (0)20 8544 9300
version #5240 e. & o. e.  21 st October 2013