Kenton MidiStream for USA models only - Manual (Page 8)

8
Transmitter Specifications
Power 9 volt battery. PP3 type (also known as 6F22 or MN1604 or S-006P)
Power consumption
Typically 55mA in normal use or 17mA when power saving
Battery life
4 – 5 hours with a full battery.
Transmit frequency
914.5 MHz
MIDI
In only
LED
Indicates power on, low battery, power save & MIDI activity
Weight
285 grams
Dimensions
100 x 70 x 30 mm (not including antenna)
Non-volatile memory
EEPROM (no back-up battery required)
Receiver Specifications
Power Input 9-12V DC 120mA, 2.1mm plug centre +ve (Mains adaptor supplied)
Receive frequency
914.5 MHz
MIDI
Out only
Display
Four status LEDs indicate Power on (TX low batt), MIDI, RF-A & RF-B
Weight
Receiver 850 grams – Power adaptor 300 grams
Dimensions
241 x 115 x 32 mm (not including antennas)
Non-volatile memory
EEPROM (no back-up battery required)
WARRANTY
MidiStream comes with a 12 month (from purchase date) back to base warranty, (i.e. customer must
arrange and pay for carriage to and from Kenton Electronics).
Brookfarm House, Station Road, South Wimbledon, London, SW19 2LP, UK
Tel: +44 (0)20 8544 9200 Fax: +44 (0)20 8544 9300
e-mail: [email protected] www.kentonuk.com
rev# 1116 e. & o. e.

14
th
March 2004