2 how to remove the battery, 3 how to charge the battery, 4 how to install & remove the sim card – Verykool i607 User Manual
Page 10: 4 ime, 5 make & receive calls, 1 make a call

3. Close the phone cover.
3.2 How to remove the battery
1. Open the back cover.
2. Remove the battery from the battery slot.
Note: We recommend first off and then remove the battery to avoid
loss of data in mobile phones.
3.3 How to charge the battery
Plug one end of the charger to the phone charging port, the other end into a
household power outlet.
Note: This machine can be connected to a computer USB port to
charge.
When charging the battery level indicator on the screen icon was dynamic
display, until the battery is full up.
After charging, disconnect the power, then unplug the charger, so that the
charger no-load.
3.4 How to install & remove the SIM card
1. The machine supports two SIM cards. Before doing the following, make
sure the phone is turned off and no charging.
2. Open the back cover, remove the battery.
3. Make the golden contacts of the SIM card face down, Card gap facing
the slot gap, and then put into it.
4. Install the battery and close the battery cover.
SIM card's removal and installation steps are in reverse.
4 IME
This phone supports multiple languages input. The IME can be alternated
by pressing the “Shift” key in the edit interface. Then press the
corresponding keys in the keyboard to input.
5 Make & receive calls
5.1 make a call
Enter the phone number in the standby screen, press the Send key with the
selected SIM card to make calls.
3