Verykool R13 - Manual (Page 17)

12
1.5.2 Text input and edit window
Enter the text input screen, you can short press the *
key to
enter the symbols selecting screen; short
press the # key to switch input method. There are
some input methods preset in your phone; you can
select the one which you liked. You can also activate
Options, to select Input method so as to switch the
preferred input methods.
2 Dial and answer the call
Note: For Dual-SIM models, please select
SIM1/SIM2 before proceeding.
2.1 Making a call
When the network operator’s logo appears on the
screen, the mobile phone enters into the normal
standby state in which you can dial or answer a
call. The network signal strength indicator at the
top of the screen. The call quality is relatively
largely
impacted by obstacles. Therefore,
movement in a small range can effectively
improve the signal strength.
2.1.1 Direct dial
Making domestic call
In the standby screen, input the call numbers
(please add the area code for domestic
long-distance calls), then press the Snd key
to make the call in single card mode; press
LSK to make SIM1 card call, press Snd key
to make SIM2 card call in dual card mode.
Calling extension of fixed number
When calling the extension number of a fixed
number, you need to dial the host number and
then dial the extension number according to the
corresponding voice hints. If you insert “p”
between the host number and extension number,
the mobile phone will automatically dial the
extension number for you.