Verykool i125 - Manual (Page 9)

i125(verykool) User Manual_V1.0
3.2 Charging the battery
Your phone is powered by a rechargeable battery. When the battery is weak, the battery
sensor informs you. At this time, you need charge the battery. When the battery becomes too
weak for the phone to operate, it switches off automatically.
1) Connect the charger to a power socket.
2) Connect the charger to the charger jack on the phone.
3) Wait until the battery is completely charged. During charging, the
charging icon is displayed in animation. When the charging icon
becomes static, the battery is fully charged.
4) Disconnect the charger from the phone. Disconnect the charger
from the power socket.
5) Connect the charger to a power sockets shown in the image.
3.3 Inserting the SIM card
1) Power off the phone; remove battery and other external power
connection, as shown in the image.
2) Insert SIM card into SIM card socket.
3) When you need to remove SIM card, please power off the
phone first, remove battery, then remove the card.
※ Note:
(a) Be careful when handling, inserting or removing the SIM card,
friction or bending may damage SIM card.
(b) If left unused, keep SIM card out of the reach of small children.
(c) Keep SIM card away from static, dusty and water.
(d) When inserting or removing SIM card, always make sure that the phone is switched off
before you remove the battery. Or the SIM card memory might be damaged. ※
3.4 T-Flash card use
3.4.1 Installing T-Flash card
This mobile supports the T-Flash card feature. Make sure that the T-Flash card has already
inserted into mobile. T-Flash card slot locate at the right top of the SIM
card.
1) Power off the phone; remove battery and other external power
connection.
2) Insert memory card into card slot as shown in the image.
※ Note: No micro SD card is delivered in the product package. The micro
SD card is sold separately. ※
3.4.2 T-Flash card use
1) File operation specification
The music and video file are saved in the T-Flash card. If you need operate with the files, the
files must be saved in the card firstly. Act as following:
² Connect PC port and USB port with specific USB line. USB port is on the bottom of the
phone.
² After inserting the USB line, the display shows tip information. Select “Mass storage”.
² Or insert initial T-Flash card into specific card reader, and then insert the reader into USB
port.
² Select “My computer—movable disk”, can use the T-Flash function. Add or delete files in
the music / video fold on the card.
² Stop the USB function on computer; disconnect the USB line with mobile. (*Note: Must
stop the function on the computer firstly, then disconnect the line with mobile, otherwise
the data will be lost*).
2) T-Flash card directory specification
Proprietary & Confidential -4-