Canon Trimmer - Manual (Page 23)

4-2 Specifications
Specifications
Specifications
*
1
If the cover sheet is thinner than the other sheets in the booklet, the cover sheet may be scratched. It is
recommended to use a thicker sheet for the cover sheet.
*
2
The maximum number of sheets trimmable can change depending on the connected host machine.
*
3
The possible trim size can change depending on the connected host machine.
*
4
When the delivery tray is removed, the conveyor full condition is not detected, and continuous operation is
possible.
Product Name Two-Knife Booklet Trimmer-A1
Description of Product Upper knife reciprocating top-bottom trimmer
Maximum number of sheets
trimmable *
1
*
2
50 sheets (80 gsm),
48 sheets (80 gsm) + 2 sheets (300 gsm)
Possible trim size *
3
A3, B4, A4R, 13" x 19.2" (330.2 mm x 487.7 mm), 12" x 18",
11" x 17", LGL, LTRR, 12.60" x 17.72" (320 mm x 450 mm [SRA3])
(Above sizes are native sheet sizes before half folded.)
Possible trim width Top-bottom: 2 to 15 mm (0.08” to 0.59”)
Normally the top-bottom length after trimming should be 190 mm
(7.48”) or larger.
Trim Box Capacity Approximately Trimmed strip from 1,500 sheets (width 15 mm
[0.59"], A4, 80 gsm, approximately 750 sheets on top and bot-
tom respectively)
Conveyor Capacity *
4
30 booklets (40 sheets of A4 booklet, 80 gsm, when trimming
20mm [0.79"] of width in Booklet Trimmer)
Machine Dimensions 536 (W) x 770 (D) x 1,040 (H) mm (21 1/8" x 30 3/8" x 41")
(Without conveyor section and delivery tray)
Weight Approximately 145 kg (319 lb)
(Without conveyor section and delivery tray)
Installation Space with Host Machine Installation space differs depending on the connected host machine.
Refer to the "Machine Dimension" described on the manual of the
host machine, and this machine.
Voltage 120-127V AC, 50/60Hz, 4A
Power Consumption 440 W or less
Noise Level 70 dBA or less
Environmental Temperature
in Use Compliant with the specification of the host machine (printer)
Temperature
in Storage -10 to 40 ° C (14 to 104 ° F)
Temperature
in Transportation -10 to 50 ° C (14 to 122 ° F)
Humidity Compliant with the specification of the host machine (printer)
Pressure 608 to 1,013 hPa (18 to 30 in Hg)
Contamination
Level Pollution Degree 2 (Office environment)