4 cable / antenna, 5 output format, Audio setup – Centrios 1611304 User Manual
Page 16: 1 drc, 2 spdif
GB 15
GB
2.4 CABLE / ANTENNA
-
Use or to highlight CABLE / ANTENNA and
press ENTER.
-
Use or to select between Antenna & Cable
to match your TV setting, press ENTER again to
confirm.
2.5 OUTPUT FORMAT
-
Use or to highlight OUTPUT FORMAT and
press ENTER.
-
Use or to select among NTSC, PAL &
Progressive to match your TV or other
equipment, press ENTER again to confirm.
Progressive:
By displaying all the lines of a picture
simultaneously (instead of displaying odd and
even lines alternatively such as a conventional
TV). Progressive Scan greatly enhance picture
resolution while minimizing distortion and
flickering.
To use this feature, your TV must be
Progressive Scan compatible with Component
Video Output jacks connected to the DVD
unit.
3. AUDIO SETUP
Use the Active Navigation keys to select Audio
Setup, and press ENTER to confirm.
3.1 DRC
-
Use or to highlight DRC and press ENTER.
-
Use or to turn DRC on/off, press ENTER
again to confirm.
This controls the Dynamic Range Compression
(DRC) for night time listening. DRC reduces the
difference bewteen normal voices and sounds
such as explosion to avoid waking your
neighbours. The amount of range control available
depends on the disc.
3.2 SPDIF
-
Use or to highlight SPDIF and press ENTER.
-
Use or to select between PCM and Digital,
press ENTER again to confirm.
Select the Digital option for Audio connection to
a non DTS or Dolby decoding external amplifiers
& PCM option for decoding equipped amplifiers.
OUTPUT FMT
NTSC
PAL
Progressive
SPDIF
PCM
Digital
DRC
ON
Off
CABLE / ANT.
Antenna
Cable
SETUP
Language
Video Setup
Audio Setup
System Setup
Disc Media
Record Setup
Schedule
AUDIO SETUP
DRC
SPDIF