Curtis Mathes CMC13410 - Manual (Page 29)

29 C HAPTER F OUR : VCR O PERATION
VCR O PERATION
Using Advanced Recording
Features, continued
Using Program Review
Program Review allows you to
review all of the programmed
recordings currently stored in
the TV/VCR’s memory and to
remove a programmed
recording quickly and easily.
1 Press MENU to display the
menu.
2 Press CH▼ until “VCR Setup”
is selected. Press VOL+.
3 Press CH▼ until “Program
Review” is selected.
Press VOL+.
The information for the first
program appears on the
screen.
✔ Program Review is only
available if you have
programmed your TV/VCR to
record at a later time.
4 To see the information for the
program number, press VOL+.
✔ If you’re recording through a
cable box, the Program Review
screen displays the output
channel of the cable box as the
channel number to be recorded.
5 If you want to remove a
program from memory, press
CLEAR when the program
you want to erase appears
on the screen.
That program is erased from
memory.
The TV/VCR is equipped with
a program memory backup
that saves all the timer
program information if the
power to the TV/VCR is
interrupted.
If the unit has been without
power, all of the timer
program information will be
disabled, until you reset the
clock. When the clock is
reset, the programs will be
restored.
6 Press MENU to exit the
menu.
VCR Setup
Timer Record
Program Review
True Repeat
: Off
Block Repeat : 1
▲▼ Move œ√ Sel. Menu
Program Revies
Date Start End CH
1. 5/01 6:30pm √ 7:30 24
2. 5/02 6:30pm √ 7:30 11
3. -/-- -:--am √ -:-- --
4. -/-- -:--am √ -:-- --
5. -/-- -:--am √ -:-- --
6. -/-- -:--am √ -:-- --
Clear : REC Canel
▲▼ Move √ Adj. Menu
Menu
Picture
Time Set
Setup
VCR Setup
Caption
V-chip
▲▼ Move œ√ Sel. Exit
CMC13410/19410 3/28/02 11:02 AM Page 29