4 - vga & megapixel settings, 5 - mirror decoding – Code Alarm CR3 User Manual
Page 60
C002332_09_CR3 User Manual - 54
Save Settings
5.4 - VGA & Megapixel Settings
User’s may optimize the CR3’s megapixel (SXGA) imager (1280 x 1024) to VGA (640 x 480). This feature
is used to decrease the pixel sampling area, which will greatly increase processing speed. This is an
advanced feature used for the rapid decoding of 1-dimensional/linear codes and larger module size 2-
dimensional codes. Code recommends testing this feature, as it will not work well with many high density
codes.
Enable VGA - 640 x 480
Enable SXGA - 1280 x 1024 Enable
DOT
(Default)
5.5 - Mirror Decoding
Scan the following codes to enable/disable the mirroring feature:
On
Off
(Default)
Note: The Mirroring feature allows the CR3 to read codes as they are seen through a mirror (inversed
180°). If the Mirroring feature is enabled, all other code reading ability will be disabled.