Code Alarm CR3 - Manual (Page 18)

C002332_09_CR3 User Manual - 12 Save Settings
1.6.4.1 - RS232 Communication Data Bit Settings
Scan the following codes to set the appropriate data bit:
7 Data Bits 8 Data Bits (Default)
1.6.4.2 - RS232 Communication Stop Bit Settings
Scan the following code to set the appropriate stop bit data:
2 Stop Bits (Default)
1.6.4.3 - RS232 Communication Baud Rate Settings
Scan the following codes to set the appropriate baud rate:
1200 2400 4800 9600
19200 38400 57600 (Default) 115200
1.6.4.4 - RS232 Communication Parity Settings
Scan the following codes to set parity:
Even Odd None (Default)