Casio EX-Z50 - Manual (Page 99)

99
OTHER RECORDING FUNCTIONS
REC Mode Camera Settings
The following are the settings you can configure before
recording an image using a REC mode.
• ISO sensitivity
• Sharpness
• Saturation
• Contrast
• Grid on/off
• Image Review on/off
• Icon Help on/off
• L/R key setting
• Power on default settings
• Resetting the camera
NOTE
• You can also configure the settings listed below. See
the referenced pages for more information.
— Size (page 65)
— Quality (page 66)
— White Balance (page 78)
— Digital Zoom (page 57)
— AF Area (page 70)
— Auto PF (page 69)
— Flash Intensity (page 61)
— Flash Assist (page 61)
IMPORTANT!
• Note that the above histograms are shown for
illustrative purposes only. You may not be able to
achieve exactly the same shapes for particular
subjects.
• A centered histogram does not necessarily
guarantee optimum exposure. The recorded image
may be over-exposed or under-exposed, even
though its histogram is centered.
• You may not be able to achieve an optimum
histogram configuration due to the limitations of EV
shift.
• Use of the flash as well as certain shooting
conditions can cause the histogram to indicate
exposure that is different from the actual exposure of
the image when it was recorded.
• The histogram does not appear when you are using
Coupling Shot (page 85) or Pre-shot (page 87).
• The RGB (color component) histogram is displayed
for snapshots only. In the Movie mode, only the
luminance distribution histogram appears on the
monitor screen.