Connect Tech PCIE/104 - Manual (Page 13)

Connect Tech Xtreme/SBC PCIe/104 Single Board Computer and PCIe/104 Qseven Carrier Board - User Manual
Revision 0.02 13
USB 2.0
Description
The Xtreme/SBC implements 4 of the 8 available USB 2.0 connections via two connectors. Over current
protection and power supply filtering is provided.
Only the USB host features of the Qseven specification have been implemented, USB client features are
not supported.
Connector
Function USB 2.0 x2
Locations P3A, P3B
Type Hirose DF13-8P
Pinout Pin Signal Description
1 VCC_USB_0 Port 0 Filtered +5V
2 USB_0_N Port 0 Data
3 USB_0_P Port 0 Data
4 USB_GND_0 Port 0 Filtered Digital Ground
5 USB_GND_1 Port 1 Filtered Digital Ground
6 USB_1_N Port 1 Data
7 USB_1_N Port 1 Data
8 VCC_USB_1 Port 1 Filtered +5V
SATA
Description
The Xtreme/SBC provides 2 SATA host connections.
US15W: Most Qseven modules based on the US15W, convert the US15W’s IDE interface to one SATA
connection (as IDE master) and one built-in NAND based flash drive (as IDE slave). Consult the Qseven
module’s documentation for more information.
In this case only P10A connector is active