Curtis SRCD-4400 User Manual
Page 5
PRE-SETTING STATIONS IN THE TUNER MEMORY
This system includes a 30 station preset memory. You can store up to 15 FM
stations and 15 AM stations in the tuner memory for immediate recall. The procedure
for storing stations in memory is as follows:
1.) Follow under LISTENING TO THE RADIO in page 7 to select the first station
You wish to memorize. Example FM 103.50 MHz.
2.) When the desired station appears on the display press the MEMORY button
On the front panel or the MEMORY button on the remote control. The
NUMBER indicator appears and MEMORY flash in the display.
3.) Press the PRESET UP/PLAY/PAUSE button on the front panel or remote
Control once to select preset channel number 1.
4.) Press the MEMORY button on the front panel or the MEMORY button on the
Remote control once more to enter the station in preset memory number 1.
5.) Repeat steps 1 through 4, selecting a different preset number in Step 3 each
time until you have entered up to 15 FM stations in the tuner memory.
6.) Press the TUNER/BAND button to select the AM band and follow the same
procedure to enter up to 15 AM stations in the tuner memory.
“
”
-8-
ST
MEMORY
ST
“
”
ST
MEMORY
-9-
RECALLING PRESET STATIONS
Select the desired band. Press the PRESET UP/PLAY/PAUSE button on the
front panel or the remote control repeatedly to scroll through the preset
Memories until the display shows the desired station.
CHANGING PRESET STATIONS
To change any preset station memory select the desired band and tune to the new
station you wish to memorize. Press the MEMORY button and then press the
PRESET UP/PLAY/PAUSE button to display the memory number you wish to
Change. Press the MEMORY button again to enter the new station in the memory.
The new station is memorized and the previous station is deleted from the
Memory.
ST