Recording from the radio, Recording from aux, Recording from the aux – Philips MC10537 User Manual
Page 18: Tape operation / recording, Maintenance
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Tape Operation / Recording
6
For brief interruptions during recording, press
PAUSE.To resume recording, press PAUSE
again.
7
To stop recording, press STOP'OPEN.
Recording from the radio
Tune to the desired radio station (seeTuning to
radio stations).
Press STOP'OPEN to open the tape door
6
To stop recording, press STOP*OPEN,
Maintenance
Insert a suitable tape into the deck and close the
tape door
Press RECORD to start recording.
For brief interruptions, press PAUSE.To resume
recording, press PAUSE again.
Recording from Aux
Select
AUX
source.
If necessary, prepare the additional appliance for
recording.
3
Press RECORD to start recording.
Cleaning the Cabinet
Use a soft cloth slightly moistened with a mild
detergent solution. Do not use a solution
containing alcohol, spirits, ammonia or abrasives.
Cleaning Discs
When a disc becomes dirty
clean it with a cleaning cloth.
Wipe the disc from the center
out
Do not use solvents such as
benzene, thinner commercially
available cleaners, or antistatic
spray intended tor analog records.
Cleaning the disc lens
After prolonged use, dirt or dust may
accumulate at the disc lens.To ensure good
playback quality clean the disc lens with Philips
CD Lens Cleaner or any commercially available
cleaner Follow the instructions supplied with
cleaner
Cleaning the Heads and the Tape Paths
To ensure good recording and playback quality
clean the heads (A), the capstan(s) (B), and '
pressure roller(s) (© after every 50 hours of
tape operation.
Use a cotton swab slightly moistened with
cleaning fluid or alcohol.
You can also clean the heads by playing a
cleaning tape once.
Demagnetizing the heads
• Use a demagnetizing tape available at your
dealer
18