Philips MC10537 - Manual (Page 13)

Basic Functions
IMPORTANT:
Before you operate the system, complete
the preparation procedures.
Switching the system on
• Press
(
1
)
STANDBY ON or SELECT
SOURCE
The system will switch to the last selected
source.
• press CD, TUNER, TAPE or AUX on the
remote control,
^ The system will switch to the selected source.
To switch the system to standby mode
• Press (!) STANDBY ON on the system or
remote control.
• If In tape mode or recording mode, press
STOP*OPEN first
-» The volume level, Interactive sound settings,
last selected source and tuner presets will be
retained In the player's memory.
Adjusting volume and sound
Turn the VOLUME control counter-clockwise
to decrease or clockwise to Increase volume on
the system (or press VOL — / + on the remote
control).
Display shows the volume level i'UL and a
number from 0-32.
Press DSC repeatedly to select the desired
sound effect: OPTIMAL (no indication)/
ROCK (:^t) / JAZZ ( l f ) / P O P ( ^ ) .
Press DBB to switch bass enhancement; on or
off. ^
-> Display shows: iiia:« If the DBB Is activated.
Press INCREDIBLE SURR. (IS on t^e
remote control) to switch the surround sound
effect on or off ,
Display shows: if activated.
Note: *
- The effect of INCREDIBLE SURROUND may
vary with different types of musk.
Press MUTE on the remote
control to interrupt sound
reproduction instantly.
Playback will continue
without sound and the display
shows I (LIfT.
To activate sound reproduction you can:
- press MUTE again;
~ adjust the volume controls;
- change source.
fe) &
Power-saving automatic standby
As a power-saving feature, the system
automatically switches to standby 15 minutes
after a tape or CD has reached the end and no
control Is operated.
13