Campbell Hausfeld IN727900AV - Manual (Page 9)

Features
aNtI-dry FIre
This tool is equipped with an Anti-Dry
Fire feature. This prevents the Work
Contact Element (WCE) from being
pushed in when only a few nails remain.
Simply load new nail clip behind
remaining nails to continue shooting.
tetHered No-Mar
The tool is fitted with a no-mar tip which
is tethered to the tool to prevent loss
when not mounted to tool. To utilize the
no-mar tip, simply slide it over the tools
WCE.
loW NaIl INdICator lIgHts
The tool is equipped with lights on either
side of the tool near the nose. When the
nail count becomes low, the lights will
turn yellow. When the nail count is nearly
out, the Anti-Dry Fire feature will engage
and the lights will turn red. (See Loading
the Nailer section).
NaIl PlaCeMeNt laser PoINter
The tool is equipped with a laser mounted
near the nose. This can be seen through
the wide slots in the WCE and / or no-
mar tip. The laser will indicate exact
placement of the fastener.
This is a Class IIIA
Laser Product that
emits laser radiation. Do not stare into beam
or view directly with optical instruments.
BuBBle level
The tool is equipped with a bubble level
located on the head cap. This will assist
in aligning the tool for level driving of the
fastener. The bubble level will assist in
vertical and horizontal positioning of the
tool.
Getting To Know Your Brad Nailer Like A Pro
Magazine
Latch
Magazine
Tethered
No-mar Tip
Quick Clear Nose
Cover
Rear Exhaust
Low Nail
Indicator
Light
Bubble
Level
Trigger
Rubber Comfort
Grip
Nail Loading Area
Work Contact
Element (WCE)
Pull-out
Warning
Decal
Electronics
ON / OFF
Switch
Conversion Switch
Swivel Plug
Battery Cover/
Compartment
Adjustable
Depth Control
Thumbwheel
Laser
Low Nail
Indicator
Light
No-mar Tip
Storage Post
Figure 6 - Components of the Brad Nailer
Operating Instructions and Parts Manual
www.chpower.com
CHN70200
9