Remote controller key function – Crimestopper Security Products DVR User Manual
Page 3

Power Port Description
Power Connect
Description
1. YELLOW ---------------TO BATTERY IN.
2. RED ---------------------TO ACC IN.
3. BROWN ----------------TO DOOR TRIGGER (–).
4. BROWN/WHITE------TO DOOR TRIGGER (+).
5. GREEN -----------------TO HANDBRAKE.
6. BLUE --------------------DC 12V OUT (200mA).
(Connect indoor camera power)
7. WHITE ------------------TO PARKING LIGHT.
8. WHITE / RED----------TO REVERSE.
9. PINK/WHITE-----------NC.
10. PINK ---------------------NC.
11. BLACK ------------------TO GND.
12. BLACK ------------------TO GND.
Remote Controller Key Function
Item
Function
Description
-1-
POWER
Toggle key to switch power ON/OFF。
-2-
MENU
Press to enter system setup。
-3-
EXIT
Press to exit Menu。
-4-
OK
During Menu Mode, press to confirm selection and enter sub-selection。
-5-
RESET
Toggle key to force switch to record V3 (indoor camera) and back to original
camera record. With ignition ON, press reset button to switch V1 to V3.
-6-
pq
During Menu Mode,selection up/down operation。
During Normal Mode,Press
p (2x) to Zoom in。Press q (2x) to Zoom out。
-7-
tu
During Menu Mode,selection left/right operation。