Clarity Amplified Big Button Cordless Phone with Corded Digital Answering Machine E713CC - Manual (Page 30)

30
ANSWERING MACHINE SYSTEM
Set the Answer Delay
You can set the number of rings before the answering machine answers and starts playing
your announcement. You can set the answering system to answer after two to six rings
or TIME SAVER.
When you ring in to access your messages remotely, if your answering machine is set
to toll saver, it will answer after 2 rings if you have new messages. It will answer after 6
rings if you do not have any new messages, so if you call in and don’t get an answer after
2 rings, you can hang up and save on call charges.
1. Press and to select Answering sys.
2. Press and to select Ans sys setup.
3. Press and to select # of rings.
4. Scroll and to select the desired answer delay from
the available options 2, 3, 4 (default), 5, 6 or Toll Saver.
5. Press to confirm; display shows Saved.
Set the Recording Time of Incoming Message
You can set the maximum length of the recording time of the incoming messages.
1. Press and to select Answering sys.
2. Press and to select Ans sys setup.
3. Press and to select Recording time.
4. Press and to select your desired recording time
from the available options 1 min, 2 min (default), 3 min.
5. Press to confirm; display shows Saved.
Set the Outgoing Message Language
The answering machine announces the outgoing message when it answers a call. There is
a pre-set OGM for each of ANS & REC mode or ANSWER ONLY mode. You are able
to select your desired OGM language to playback.
1. Press and to select Answering sys.
2. Press and to select Ans sys setup.
3. Press and to select Voice language.
4. Press and to select your desired language.
USING YOUR CORDED BASE