Cary Audio Design CARY AUDIO CD 306 SACD - Manual (Page 7)

WELCOME
UNPACKING AND INSTALLATION
This section describes the unpacking and installation procedures for your new component.
Unpacking
All Cary Audio Design shipping cartons have been specially designed to protect their contents and
special care has been taken to prevent damage under normal shipping conditions. Mishandling
should be evident upon inspection of the shipping container. If shipping damage is found after
visual inspection, take care not to destroy the evidence. If necessary, document the damage with
photographs and contact the transport carrier immediately.
Carefully remove your new component from its packing carton and examine it closely for signs of
shipping damage. We strongly recommend saving all original packing cartons to protect your
component from damage should you wish to store it or ship it at a later date.
Power Requirement
The CD 306 SACD Transport/Processor is designed to operate from AC mains current. The design
AC voltage is either 100-120V/or 200-240 Volts AC at 50-60 Hz.
Connections
Digital Outputs:
 The outputs send a digital signal and should only be connected to the
appropriate digital signal input of an accompanying component.
Analog Outputs:
 These are for connection to the CD or AUX input jacks of an accompanying
preamplifier or amplifier.
Warranty Card
If you are the original purchaser of this unit and you purchased it in the United States, you
should fill out the enclosed warranty registration card and return it to Cary Audio Design within
15 days of your purchase. Cary Audio Design also suggests that you keep your original packing
cartons in case you ever need to ship the unit when moving to a new home. Warranty restrictions
apply. Consult the warranty section of this manual for details. Please be certain to keep a copy of
the original sales receipt from your Authorized Cary Audio Design dealer to validate the warranty if
ever needed.
6