Cary Audio Design CARY AUDIO CD 306 SACD - Manual (Page 21)

PLAYBACK
USING THE CD 306 SACD PRO AS A DIGITAL TO ANALOG (D/A) CONVERTER
Select "AES/EBU", "COAXIAL" or "TOSLINK" button.
1. Press the POWER button to turn on the power.
2. Press the COAXIAL button.
3. COAXIAL D-IN : NONE
D-OUT: NONE A-OUT: NONE
Analog Out is the first to appear on the display, then the external digital inputs sampling
frequency appears. (Example: External digital inputs sampling frequency is 192kHz)
COAXIAL D-IN : 192k
D-OUT: 192k A-OUT: 192k
* Digital input signal can be output in digital format and analog format.
* Only linear PCM signals with a sampling frequency of 32kHz, 44.1kHz, 48kHz, 88.2kHz,
176.4kHz or 192kHz can be played on this set. Do not input any digital signal other
than linear pulse code modulation (PCM) signals. (CD-ROM, Dolby Digital, DTS signals,
etc.) Doing so will generate output noise that could damage the speakers.
* When the digital sampling frequency is switched, the muting circuit is activated for 1 or
2 seconds, so the sound will stop momentarily and then start again each time the
digital sample rate is changed.
20