Classe Audio CDP-102 - Manual (Page 45)

45
Specifications – CDP-102
All specifi cations are accurate at the time of printing. Classé reserves the right to
adjust specifi cations without notice.
„ Frequency response
(Balanced) 8 Hz – 20 kHz ±0.1dB
(single ended) 8 Hz – 20 kHz +0/-0.7dB
„ Distortion (THD+noise) 0.001%
„ Output voltage (single-ended) 2Vrms
„ Output voltage (balanced) 4Vrms
„ Signal-to-noise ratio 110dB
typical
„ Channel separation better than 115dB
„ D/A Converter 1 x Cirrus Logic CS4398
„ Audio sample rate 192kHz
„ Formats supported CD, CD-R, CD-RW, DVD Audio, DVD Video,
VCD, SVCD, MP3, WMA, DVD-R, DVD+R,
DVD-RW, DVD+RW
„ Power consumption 55W
„ Mains voltage
determined by the needs of country for which
the unit was manufactured; cannot be reset by dealer or user
„ Overall dimensions
Width: 17.5” (445mm)
Depth: 16.5” (419mm)
Height: 4.75” (121mm)
„ Net weight 27 lbs (12.3 kg)
„ Shipping weight 35 lbs (15.9 kg)
For more information, see your Classé dealer, or contact:
Classé Audio
5070 François Cusson
Lachine, Quebec
Canada H8T 1B3
Telephone +1 (514) 636-6384
FAX
+1 (514) 636-1428
Internet: http://www.classeaudio.com
email: [email protected]
Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved.
i-Command™ is a trademark of Equity International, Inc. All rights reserved.
AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved.
Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.