Classe Audio CDP-102 - Manual (Page 34)

34
display setup menu
Th e display setup menu allows you to defi ne your preferences for three aspects
of the Touchscreen: the brightness of the backlighting, the timeout of the
backlighting, and the language used.
brightness Th e brightness setting has three possible values: low, medium, and high. Select
the appropriate setting based on the level of ambient light typically found in
your listening room while using the system. A high brightness setting usually
works best in brightly-lit rooms; you may fi nd that a lower setting is less visually
intrusive under more subdued lighting conditions.
timeout If you prefer listening to music in a dimly-lit or darkened room, you may fi nd
even the low brightness setting of the display somewhat distracting. If so, you
can vary the timeout of the backlighting so as to turn it off entirely after a
period of inactivity you select.
In this context, activity refers to any use of the user interface. Th is includes hard
buttons, the LCD touchscreen, and the remote control.
For example, if you reduce the timeout to its minimum setting, the backlighting
will illuminate the display as soon as you interact with any of the disc player
controls, and stay on for only three seconds—just long enough for you to check
on something. If you continue to use any of the controls (at least once every
three seconds), the display will remain lit. It will then extinguish itself after three
seconds of inactivity on your part.