Crestron electronic CNRFGWA - Manual (Page 5)

Crestron CNRFGWA Wireless RF Receiver
Operations Guide - DOC. 8086A Wireless RF Receiver: CNRFGWA • 1
• One-way RF receiver/gateway
• Crystal locked tuning for reliable reception. Two frequencies available:
− 433.92 MHz
− 418 MHz
• Reception range up to 300 feet
• Up to 15 wireless touchpanels and/or 240 wireless remotes can
communicate with one gateway
Wireless RF Receiver:
CNRFGWA
Introduction
Functions and Features
The CNRFGWA wireless one-way radio frequency (RF) gateway/receiver (gateway)
is designed to operate in a Crestron
® 2-Series or CNX control system. The gateway
is available in two versions: one operates at 433.92 MHz; the other, CNRFGWA-
418, operates at 418 MHz. Except for operating frequency, the units are functionally
identical.
The gateway receives RF signals from one or more wireless one-way touchpanels
such as the ST-1550, ST-1550C, ST-1700C, and MT-500C (418 MHz only), and
wireless remotes such as the CNWM, CNRFT-32A and 48A, and CNRFHT-15A and
30A.
The CNRFGWA gateway translates the received signals into commands for
transmission over the Crestron network (Cresnet
® ). Up to 15 touchpanels or 240
wireless remotes (or some combination of the two) can communicate with one
gateway. If more touchpanels or remotes are needed, more gateways (up to
252) may
be added to the system. However, when multiple gateways are used, the units must
be located at least 50 feet from each other.
Functional Summary