CyberData 010861 930106A - Manual (Page 35)

29
VoIP Loudspeaker Amplifier Operations Guide 930106A CyberData Corporation
4 Setting up a TFTP Server
4.0 Set up a TFTP Server
Upgrading the VoIP Loudspeaker Amplifier firmware requires a TFTP server on which you access
the Web interface where you can upload the firmware files.
4.0.1 In a LINUX Environment
To set up a TFTP server on LINUX:
1. Create a directory dedicated to the TFTP server, and move the files to be uploaded to that
directory.
2. Run the following command where /tftpboot/ is the path to the directory you created in
Step 1 : the directory that contains the files to be uploaded. For example:
in.tftpd -l -s /tftpboot/your_directory_name
4.0.2 In a Windows Environment
You can find several options online for setting up a Windows TFTP server. This example explains
how to use the Solarwinds freeware TFTP server, which you can download at:
http://www.CyberData.net/support/voip
To set up a TFTP server on Windows:
1. Install and start the software.
2. Select File / Configure / Security tab / Transmit Only .
3. Make a note of the default directory name, and then move the firmware files to be uploaded to
that directory.
4. You can find several options online for setting up a Solarwinds server. This example explains
how to use the Solarwinds freeware TFTP server, which you can download at:
http://www.CyberData.net/support/voip