Clarion MAP670 - Manual (Page 59)

Note: In the rare case Clarion cannot ent you pass the second register the mom
camera (e.g. it is placed at the exit of a tunnel where GPS position is not yet
available) the warning will continue. Just tap the camera symbol displayed on the
screen to stop the warning.
These cameras are displayed with the following symbol:
4.9.1.5 Red light cameras
These cameras check if you obey traffic lights or not. The warning is similar to fixed
cameras, but as there is no speed limit given, only the proximity is announced.
These cameras are displayed with the following symbol:
4.9.2 Controlled traffic direction
the traffic, both
directions, or even se an intersection, when they are mounted on a
rotating base. Clarion warns you only if ured or possibly
measured direction.
The measured direction of the cameras is displayed with the following symbols:
The different cameras can measure the speed of one direction of
veral directions in
you drive in a meas
4.9.3 Speed limit checked
As additional information, the speed lim cked by the camera is given for fixed,
built-in and section control cameras. When you manually save a camera location
road (if available) is used by
it che
from the Cursor menu (Page 35), the speed limit of the
default, but you can change this value with the given control:
59