Clarion CZ500 - Manual (Page 15)

English
Français
Español
Italiano
Español
Español
Español
Español
Español
15
iTunes ® Tagging
The CZ500 offers iTunes ® Tagging, which
allows the user to “Tag” songs playing on HD
Radio ™ stations for purchase later through
iTunes. When you press the [ISR] button, the
unit stores the title and artist song information
that can then be transferred to your iPod when
connected to the unit. A list titled "Tagged" will
appear in iTunes, allowing you the option to
purchase your tagged songs.
Note:
“iTunes ® Tagging” function works by
connecting THD300 (sold separately).
iPod compatibility
For detailed information on the playable iPod
models, see our home page: www.clarion.
com
Note:
• iPhones can also be connected to this
system and “iPod” appearing in this manual
should be referred to as “iPod/iPhone”.
• This system will not operate or may
operate improperly with unsupported
versions.
Tagging music
To begin tagging music, tune to an HD Radio
station. The DIGITAL icon at the display must
be illuminated, indicating a digital station
is being received. TAG icon lights up when
Tagging function is ready. Press the [ISR]
button on the unit. Proper tagging depends
very much on good radio reception. If the
reception is poor, tagging will be affected.
“STORE ##/64” will appear in the display. The
song information is saved to the unit memory
until an iPod is connected. You can tag up to
64 songs before the tags must be transferred
to an iPod or deleted. When the Tag memory
reaches capacity (64 tags) the bottom of the
screen displays “MEMO FULL”.
Table 5: TAG Messages
Tag Message Reason
STORE ##/64
If the Tags data is ready, and
the [ISR] button is pressed
SENDING ## Tags data is sending to iPod
MEMO FULL Tag storage is full
DEFFICIENT Tag data is not available
IPOD FULL iPod memory is full
NOT SUPPORT
An iPod without Tagging
function is connected and the
[ISR] button is pressed
Note:
Tags saved to your iPod can be managed
using the iTunes software, available at www.
apple.com/itunes.
Downloading tags to your iPod
To download tags to your iPod, plug an iPod
into the unit. All existing tags are automatically
transferred to the iPod and deleted from the
head unit’s memory. If an iPod is connected
when a song is tagged, the Tag will be
immediately transferred to the iPod.
Note:
When transferring Tags to an iPod, the unit
must remain in Radio mode. To purchase
tagged songs, you must sync your iPod to
iTunes and then click the “Tagged” list on the
left side of the iTunes software screen. Click
the “View” button for purchasing information.
Note:
1. How to enter the iTunes tagging function?
“TAG” and “DIGITAL” light up when Tagging
function is ready, press the [ISR] button to
start iTunes Tagging.
2. What is seen on the radio’s display to let
me know I have tagged the tune?
Press the [ISR] button to show
“STORINGTAG”. After connect to a iPod,
the display shows “SENDING 01”.
If no connection with iPod, the display
will show “STORE ##/64”. You could save
64 Tag into E2PROM in total. When you
connect to a iPod, Tag information will
be saved in the iPod, and the data in
E2PROM will be cleared.
3. Then how do I get the tagged tune from my
iPod to the computer?
If you have install iTunes, connect your
iPod to your computer and buy songs
online.