Craftsman FRONT BUMPER 486.245981 - Manual (Page 5)

5 Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
STEP 2: (SEE FIGURE 3)
Remove tractor hood. (Refer to tractor manual.) •
Remove an (LT) Lawn Tractor heat shield like the one •
shown. Remove a (GT) Garden Tractor heat shield
like the one shown only if you need access to inside
of tractor frame during step 5.
IMPORTANT: Be sure to re-attach the heat shield after
bumper is installed.
INSTRUCTIONS FOR DUAL SUSPENSION BRACKET TRACTORS
REMOVE THIS
STYLE HEAT SHIELD
(LT) LAWN TRACTOR
(GT) GARDEN TRACTOR
REMOVE THIS HEAT SHIELD
ONLY IF MUFFLER MUST BE
MOVED IN STEP 4.
FIGURE 3
NOTE: Place cardboard or a mat on work surface to prevent
scratching of parts removed from carton and tractor.
NOTE: Not all hardware will be used. Unused parts may be
discarded after assembly
STEP 1: (SEE FIGURE 2)
Open parts bags labelled " • A" and "B" and verify that
all parts needed are present.
HARDWARE SHOWN FULL SIZE
EXCEPT WHERE NOTED
PARTS BAG "B"
B A
D
F
E
(not full size)
(parts bag "A") (parts bag "A")
C
Ref. Part Qty. Description
A 48894 2 Self Threading Bolt, 3/8-16 x 1-1/2"
B 43062 2 Hex Bolt, 3/8-16 x 1-1/2"
C 43001 4 Hex Bolt, 3/8-16 x 1"
D 44072 4 Whizlock Nut, 3/8"
E 43003 4 Lock Washer, 3/8"
F 44742 2 Plug
65932 1 Bumper
FIGURE 2