Craftsman FRONT BUMPER 486.245981 User Manual
Page 3
3
Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
HARDWARE SHOWN FULL SIZE
EXCEPT WHERE NOTED
PARTS BAG "A"
B
A
C
D
(not full size)
Ref.
Part
Qty. Description
A
43350
4
Carriage Bolt, 3/8-16 x 1"
B
44072
4
Whizlock Nut, 3/8"
C
R19171616
4
Washer, 1/2" x 1"
D
44742
2
Plug
65932
1
Bumper
NOTE: Place cardboard or a mat on work surface to prevent
scratching of parts removed from carton and tractor.
STEP 2:
(SEE FIGURE 3)
Remove tractor hood. (Refer to tractor manual.)
•
Remove the browning shield as shown.
•
FIGURE 3
REMOVE
BROWNING SHIELD
REMOVE
FRONT SCREWS
INSTRUCTIONS FOR SINGLE SUSPENSION BRACKET TRACTORS
STEP 1:
(SEE FIGURE 2)
Open parts bag labelled "
•
A" and verify that all parts
are present.
FIGURE 2
STEP 3:
(SEE FIGURE 4)
Place plug on a work bench or solid table and push
•
end of bumper down onto plug. Repeat for second
plug.
FIGURE 4
PLUG
SHORT STEP
BUMPER
PUSH DOWN
WITH EVEN
PRESSURE
WORK BENCH
OR SOLID TABLE
STEP 4:
(SEE FIGURE 5)
Insert a carriage bolt into the second mounting hole
•
from the front of the tractor frame and fully tighten a
whizlock nut onto the bolt. Repeat on other side of
tractor.
WHIZLOCK
NUT
CARRIAGE BOLT
AND WASHER
FIGURE 5