ClearOne AccuMic VC-PC - Manual (Page 9)

AccuMic Microphone — AccuMic PC 6
Configuring volume control settings
To ensure audio is heard clearly on both ends, you must configure the Volume Control
settings on your computer. You need to mute the near-end microphone balance to prevent
local audio feedback. (Note: This does not mute the AccuMic Microphone). You also need
to select and adjust the far-end microphone balance to ensure audio is being sent at a
proper level and far-end participants can hear you.
To open the volume control panel
1. From the Start Menu, go to Settings, then Control Panel.
2. Double click the Sounds and Multimedia icon to open Sounds and Multimedia Properties.
3. Select the Audio tab and click Volume in the Sound Playback section.
The Volume Control panel will open.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Figure 8. Sounds and multimedia properties
Figure 9. Volume control