ClearOne AccuMic VC-PC - Manual (Page 11)

AccuMic Microphone — AccuMic PC 8
To select and adjust far-end microphone balance
Note: You must select Microphone in the Recording Control window to ensure audio is being
sent to the far end.
1. Open Volume Control panel.
2. On the Options menu, click Properties.
3. In the Properties window, click Recording.
4. Select the Microphone check box.
5. Click OK to open the Recording Control window.
6. Click the Select check box for Microphone Balance.
7. Use the volume slider to adjust the volume of the audio being sent to the far end.
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Figure 13. Recording
Figure 14. Recording control