Jaypro sports – Jaypro Sports PVBN-6AK User Manual
Page 2
JAYPRO SPORTS
PVBN-6AK
ASSEMBLY INSTRUCTIONS
This is a generalized step-by-step process that should serve to address most types of
pulley-wheel volleyball systems. Depending on your actual set-up, some modifications to
this process may be required.
1) This patented cableless flex-net is designed to provide exceptional net tension
without bulky and cumbersome cables. The net’s overall length is approximately
34’ and systems with short leader straps or drum style winches will need to attach
the enclosed adapter cable to the winch or the strap and then clip the remaining
end to the flex-net as shown in the illustration. The actual required overall cable
length must be determined on site and the finished attachment to your existing
systems components should be made as permanent as possible.
2) Repeat the process at the anchor end by clipping the second adapter to the flex-net
and running it over to your systems anchoring fastener. Adjust as necessary to
center the net over the court and tie off as permanently as possible.