Jaypro sports – Jaypro Sports PVB-300C User Manual
Page 5

JAYPRO SPORTS
CLASSIC VOLLEYBALL SYSTEM CENTER STANDARD, PVB-300C
LIST OF MATERIALS
PIECE NO. PART
NO. DESCRIPTION
QTY
1
HB5028
3/8”-16 x 3” EYEBOLT
2
2
VBU303
LEADER STRAP ASSEMBLY
1
3
VBU31
ADJUSTMENT PIN
2
4
HN2949
EYENUT 3/8”-16
2
5
PVB301C
VOLLEYBALL STANDARD
2
6
PVB600C2
ADJUSTABLE CENTER STRAP
2
10
HS782
HEX HEAD BOLT 3/8” x 3 ½”
1
11
HN1230
LOCKNUT 3/8”-16
1
12
VBWINCH WINCH ASSEMBLY
1
SAFE USE AND HANDLING
1) Use protective padding around the standards when using this volleyball system.
2) Before every use, check all fasteners, clips and straps to look for worn or damaged
parts.
3) These uprights are very heavy and we recommend that they be moved only with two
qualified adults.
4) It is not necessary to apply excessive top cable tension to achieve the correct net
height and playability. Much of that net tension is as a result of the Velcro bottom
straps.
ASSEMBLY INSTRUCTIONS
1) Unpack unit and check to see if unit is undamaged and complete as shown on the
customer drawing. Read all assembly instructions and caution labels carefully.
2) Unit is designed to fit a 3" diameter and 10" deep sleeve of various manufacturers’.
Refer to the Double Court Layout Illustration for location of Floor Sleeves.
3) Uprights are heavy and it is imperative to have two persons lift and place into floor
sleeve. Final configuration will have Gear Winch Assembly on each outside standard.
Refer to Illustration #1.
4) Gear Winch Assembly (12) supplied with your PVB-300C must be assembled to your
existing anchor upright of your PVB-3000 Classic Volleyball System. Refer to
Illustration #2 for assembly details. (Step 1)* Clamp Gear Winch Assembly over
existing Anchor Upright and assemble using 3/8”-16 X 3 ½” Hex Head Screw (10) and
3/8” Locknut (11).
(Step 2)* Attach Leader Strap Assembly (2) to Gear Winch Assembly using Set Screw
provided in Winch Shaft. The long strap on the winch assembly must first be removed.
5) Assemble Captive Strap Assembly (6) with 3/8”-16 X 3” Eye Bolts (1) and 3/8”-16
Eye Nuts (4) to Center Standard Upright (5). Refer to Illustration #1. Use position ‘A’
for official men’s height and position ‘B’ for official women’s height.
6) Loop extension cords (provided with end standards only). Can now be securely tied to
the short winch straps now located on the two outside standards. Adjust the length of
these cords depending on court width and net length.
NOTE: SEE “NET ATTACHMENT” INSTRUCTIONS