Jaypro sports – Jaypro Sports TP-125 User Manual
Page 3

JAYPRO SPORTS
PERMANENT AND SEMI-PERMANENT TENNIS POSTS, TP-125/150
LIST OF MATERIALS
PIECE NO. PART
NO. DESCRIPTION
QTY.
1
RT-5
RATCHET WHEEL WITH HANDLE
1
2
HS324
SET SCREW 3/8”-16 x ½”
4
3
AF71
PULLEY CAP
2
4
HN2949
EYENUT 3/8”-16
2
5
05319
HEX HEAD SCREW ¼”-20 x 2”
2
6
HN256
LOCK NUT ¼”-20
2
7
AF737
PULLEY
2
8
TP1252
UPRIGHT ASSEMBLY
2
9
AF1213A
SLEEVE-TOP CAP (TP-150 ONLY)
2
10
AP5010
GROUND SLEEVE (TP-150 ONLY)
2
11
RP717
SLEEVE-BOTTOM CAP (TP-150 ONLY)
2
12
HB852
U-BOLT 3/8”-16 x 4”
1
13
HN265
LOCK NUT 3/8”-16
1
14
HW337
LOCK WASHER 3/8”
2
15
HS856
HEX HEAD BOLT 3/8”-16 x 4”
4
16
HN1230
THIN LOCK NUT ½”-13
2
17
HW2047
FLAT WASHER 3/8”
3
IMPORTANT
FOR TENNIS SLEEVE INSTALLATION, SET SLEEVES 42’-3 ½” ON CENTER.
FOR OUTDOOR VOLLEYBALL INSTALLATION, SET SLEEVES 36’ ON
CENTER.
TP-150, SEMI-PERMANENT TENNIS POSTS
SLEEVE INSTALLATION INSTRUCTIONS
Set ground sleeves exactly 42’-3 ½” on center (42’ between posts). This may require the
services of a qualified local contractor familiar with the soil conditions and building
codes particular to your area. The referenced minimum concrete dimensions are typical
for average conditions, but unusual conditions may warrant modifications by the
contractor.
IMPORTANT: PROPER INSTALLATION OF THE GROUND SLEEVES IS
ESSENTIAL TO THE SUCCESSFUL PERFORMANCE OF THIS
UNIT.
NOTE: CONCRETE SPECIFIED SHOULD BE 4000# MIN. CURING TIME
SHOULD BE 14 DAY MIN. BEFORE PUTTING INTO SERVICE.