Jaypro Sports SGP-600AX User Manual

Page 9

Text mode
Original mode

Rev-

2/17/2011

Page 9 of 12

Bottom Goal Assembly:

Stand front of soccer goal into the upright position. One person should
securely hold the face of the goal in position.

Note: If wheel kit is to be installed, slide nut bars for wheel kit
into each base member.

Slide one 3-1/4” long nut bar (12) into each base member.

Assemble rear soccer crossbar to goal base member as shown, install
hardware loosely.

Adjust rear crossbar location as needed and secure hardware.

Install auxiliary soccer backstay, line up 7” long nut bar (9). Note if the
plates don’t line up, flip the auxiliary soccer backstay. Install hardware
loosely; once parts are aligned tighten all hardware.

Anchor goal:

It is highly recommended that the rear crossbar be secured to the base of
the goalpost with a soccer / football goal anchor kit. The correct SFGA
kit depends on the size of the football gooseneck (see additional
installation instructions for SFGA kit).