Jaypro Sports SCG-9S - Manual (Page 5)

Rev-C 11/13 Page 5 of 14
2” x 4” SQUARE EXTRUDED ALUMINUM PIPE LENGTH
SCG-6S SCG-9S SCG-12S SCG-18S SCG-21S SCG-24S
UPRIGHTS 58” LONG 58” LONG 82” LONG 82” LONG 88” LONG 100” LONG
CROSSBARS 64” LONG 100” LONG 136” LONG 214” LONG 244” LONG 280” LONG
BASES 46” LONG 46” LONG 58” LONG 58” LONG 82” LONG 100” LONG
IMPORTANT NOTICE:
1. Soccer goals must be securely anchored at all times.
2. Before each use, check to make sure all Safety/Warning labels are present and
legible (see label drawing). If any are missing, contact your dealer or Jaypro Sports
for replacement Safety / Warning labels.
3. Before each use, thoroughly inspect each goal to ensure it is properly anchored, and
all hardware is secured. Inspect all components for structure integrity. Replace any
damaged or missing part or fasteners before using. Contact your dealer or Jaypro
Sports, for repair or replacement parts.
4. NEVER climb on, or allow anyone to climb on the frame or net.
5. When moving soccer goals, use adequate manpower (no less than two people) and
use extreme care to ensure the corners of the goal are not overstressed. Do not tug
on the backstays when attempting to move goals from side to side,
6. Always remove nets when goals are not in use.
7. Properly store goals when not in use or during the off-season, by disassembling,
laying the goal on its face, placing goals face to face, or placing goal face first
against a wall or fence.
8. Use of this equipment other than intended, may be hazardous.
9. Alteration or modification of this equipment may be hazardous and result in injury.
*** ASSEMBLY INSTRUCTIONS REQUIRES 3 PEOPLE ***
TOOLS REQUIRED:
(1) 9/16” Socket Wrench and Box Wrench
(1) 7/32” Allen Wrench
(1) Rubber Mallet
(1) Step Ladder
 Unpack all parts and check against parts list to ensure that all have been
included.
 Inspect all parts for damage. Report any damages to the trucking company.