Jaypro Sports RCG-9S - Manual (Page 11)

Rev-C 11/13 Page 11 of 14
Bottom Goal Assembly:
6. Install auxiliary soccer backstay, line up nut bar. Note if the plates don’t
line up, flip the auxiliary soccer backstay. Install hardware loosely; once
parts are aligned tighten all hardware. For non-official size club goals
use 3/4” long button / hex screws on bottom of the auxiliary soccer
backstay, for official size club goal use 1-1/4” long button / hex screws.
ALT: (1-1/4” HEX HEAD)
USED ON SCG-24S/RCG-24S
ALT: (1-1/4” BUTTON SCREW)
USED ON SCG-24S/RCG-24S
(1-1/4” LONG)
(1-1/4” LONG HEX HEAD)
(3/4” LONG BUTTON)