Jaypro Sports GGS-100BK User Manual
Page 9
Rev-
Page 9 of 12
Use 1/8” Allen Wrench To Securely
Tighten The Set Screw In The Hub.
If unable to slide bushing on to shaft
loosen the hardware that holds the upright.
Black Hub Points Inward Base.
Apply Loctite To Thread Then Screw Handle On.
Back Set Screw Out
Before Sliding.
3/8"-16 x 6" LONG BALL HANDLE
1/2" I.D. x 3/4" O.D. x 1" L. (FLANGE 1"
O.D. x 1/8" L.) SAE 841
Operate The Wheel Assembly Using The
Handle, Making Sure It Operates Freely.