Jaypro Sports EZ-55HP - Manual (Page 3)

JAYPRO SPORTS
EZ ROLLER GAME STANDARD, EZ-55
LIST OF MATERIALS
PIECE NO. PART NO. DESCRIPTION QTY.
1 EZ551 BASE ASSEMBLY 1
2 HS307 THUMB SCREW 1
3 EC0042 END CAP 2
4 EZ552 WHEEL AND AXLE 2
5 HS292 HEX HEAD SCREW 3/8”-16 x 3” 1
6 HN265 LOCKNUT 3/8” 1
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED: 9/16” SOCKET WRENCH
¾”
SOCKET WRENCH OR
2 8” ADJUSTABLE WRENCHES
1) ASSEMBLE ONE END CAP (3) ONTO ONE SIDE OF THE BASE CAVITY.
FILL CAVITY FULLY WITH AT LEAST 55 lbs OF FINE SAND. CLOSE
REMAINING END OF BASE CAVITY WITH END CAP (3). MAKE SURE
CAPS ARE FULLY SEATED.
2) CAREFULLY ASSEMBLE WHEEL/AXLE (4) INTO THE COUPLING NUTS
ON THE REAR OF THE BASE. TIGHTEN ONLY UNTIL INSIDE OF
WHEEL HUB RESTS AGAINST BLACK CAP. DO NOT OVERTIGHTEN.
3) ASSEMBLE REMAINING FASTENERS AS SHOWN IN THE
ILLUSTRATION.
CAUTION
DO NOT PUT EXCESSIVE LOADS ON THE UPRIGHTS OR THE UNIT MAY
BECOME UNSTABLE.
FOR RECREATIONAL USE ONLY