Jaypro Sports FBGP-520C - Manual (Page 24)

Installing the Jaypro Max-1 Football Goal Posts
www.jaypro.com JSL-Inst015 Rev20110223
23
11 Install the Wind Streamers
Before installing the uprights, install the wind streamer following these steps (see
Figure 11).
1. Hook one end of the #43, 2-inch S hook into the streamer eyelet and crimp the
hook with pliers .
2. Hook the other end of the S hook into the ¼’-20 eye-bolt and crimp the hook
with pliers.
3. Thread the ¼”-20 jam nut onto the eye-bolt, and thread the eye-bolt into the
upright cap.
4. Tighten the jam nut against the end cap.
5. Repeat the above steps for the other wind streamers.
Figure 11: Installing the wind streamers
Key
1—42-inch streamer
2—endcap
3—1/4”-20 hex nut
4—1/4”-20 eye bolt
5—#43 x 2-inch S-hook