Jaypro Sports PB90-PRO - Manual (Page 3)

REF- 2/2/2011 Page 2 of 2
4) INSTALL BRACING. Install bracing (4) following details A, B and
C. (Note: the bolt clip (8) used to attach bracing to the seat plank
measures 2” long). Adjust leg spacing to achieve dimensions shown.
Securely tighten all hardware attaching seat plank and bracing.
5) INSTALL BACKREST PLANK. Stand unit upright and assemble
backrest plank (3) following the same procedure used to attach the seat
plank – see step #3. (Note: the bolt clip (9) used to attach the backrest
plank measures 2-1/2” long).
6) INSTALL LEG END CAPS. Carefully insert the plastic end caps (11)
into the three exposed ends of each leg.
7) Check assembly to make sure legs square and properly aligned with
each other. Adjust if necessary.