Casio EXILIM EX-F1 - Manual (Page 45)

45
Snapshot Tutorial
Back lighting correction compensates for the overexposure
that can occur when shooting a backlit subject. Press Æ
(Back Lighting Correction button) to toggle back lighting
correction on and off.
• When a main subject is overexposed due to backlighting,
the camera uses EV shift exposure correction and dynamic
range correction to adjust appropriately.
• This function is disabled in the M (Manual Exposure) mode.
Pressing [AE-L/AF-L] temporarily locks the current exposure
and/or focus settings. Press [AE-L/AF-L] again to unlock the
settings.
• Pressing [AE-L/AF-L] while the shutter button is half-
pressed will lock the current exposure or focus setting.
Use the following procedure to specify the operation that the [AE-L/AF-L] button
performs.
1.
In the REC mode, press [MENU].
2.
Use [4] and [6] to select “REC”.
3.
Use [8] and [2] to select “AE/AF Lock” and then press [6].
4.
Use [8] and [2] to change the setting, and then press [SET] to apply it.
NOTE
• AE Lock and AF Lock are not supported while “ O Tracking” is selected for the “AF
Area” setting.
• Performing an EV shift operation while AE Lock is in effect will cause Auto
Exposure to be unlocked.
• Performing a zoom operation while AF Lock is in effect will cause Auto Focus to be
unlocked.
• During movie recording, you cannot lock/unlock the current exposure and focus
settings by pressing [AE-L/AF-L].
• You cannot use AE Lock or AF Lock with “Prerecord (Movie)” if you are recording a
movie.
Correcting for Back Lighting
Locking the Auto Exposure and Auto Focus Setting
Specifying the [AE-L/AF-L] button Operation
AE Lock Exposure lock
AF Lock Focus lock
AE/AF Lock Exposure and focus lock
Æ
(Back Lighting
Correction button)
[AE-L/AF-L]
C