Jaypro Sports BLDP-3TRG - Manual (Page 3)

REV-A, 4/10
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED:
(1) 9/16” Socket Wrench and Box Wrench
(1) 3/4” Socket Wrench and Box Wrench
(1) Rubber Mallet
(1) Phillips head screwdriver
• Unpack all parts and check against parts list to ensure that all have been
included.
• Inspect all parts for damage. Report any damages to the trucking
company.
Install Feet and Wheel Casters: (Tip n’ Roll Style Only – if standard bleacher skip to
step 3)
1. Attach four rubber feet (bumpers) on the bottom of each leg as shown in
figure 1.
2. Install two wheel casters and support brace on the backside of each frame
as shown in figure 2 - fully thread caster stem on, but tighten only finger
tight.
Note: The flange of each flange nut should be against the frame member.
FIGURE: 1 FIGURE: 2