Ix. install board & rim – Jaypro Sports GBDD-AHA User Manual
Page 7
Page 7 of 9
IX. INSTALL BOARD & RIM
a)
Due to the combined weight of the Backboard and Height Adjuster it is recommended that
the assembly be installed with the help of a mechanical lift and lift straps in order to protect
the glass backboard. It is also recommended that the installation be done with the help of
an additional person. Assemble the hardware as shown in Figure 8.
b)
With the Height Adjuster at the 10’ mark the 42” glass backboard should be lifted up or
down so that the top of the rim hole pattern is 9’-11” to the playing surface (see Figure 9).
c)
Assemble the goal to the board as shown in Figure 9. Level and Plumb the backboard.
d)
Tighten all nuts and hardware.
e)
See STEP X for instructions on the installation of the safety bolt.
f)
Crank the height adjuster down and up to insure that it is working properly.
FIGURE 7
FIGURE 8
- GNJA1 Installation (7 pages)
- BLPS-84 (5 pages)
- BBLD-5000 (18 pages)
- BLFS-101 (5 pages)
- BSP-30 (5 pages)
- BSP-40 (5 pages)
- BSP-40-66 (9 pages)
- BSP-30-6 (9 pages)
- BSP-33-2 (10 pages)
- BSP-44-22 (10 pages)
- BBTF-55 (8 pages)
- PROTF-55 (7 pages)
- BBTFSM-55 (10 pages)
- BBC-SPDKT (13 pages)
- BBC-700M (24 pages)
- BBC-WLKT (10 pages)
- BBC-SPRTKT (8 pages)
- CVS-10 (2 pages)
- BGLC-7500RD (24 pages)
- BBLS-12 (14 pages)
- BBGS-18RB (15 pages)
- BBFP-20 (5 pages)
- BBFP-30 (13 pages)
- FS-101 (4 pages)
- FS-77 (4 pages)
- PS-84 (5 pages)
- BLFSW (5 pages)
- BLFS-88 (5 pages)
- PSTS-77 (5 pages)
- LC-1 (3 pages)
- LC-6 (16 pages)
- PBEL54 (31 pages)
- MBBP-6 (2 pages)
- GAK-5 (4 pages)
- GBA-542 (10 pages)
- TSP-200 (15 pages)
- TSP-44 (15 pages)
- 996 (4 pages)
- 656 (4 pages)
- PBB-200 (13 pages)
- PBEL-SCB (6 pages)
- Stationary Backstops (16 pages)
- WM-48 (5 pages)
- WMSS (13 pages)