Jaypro Sports BBGS-18RD User Manual
Page 2
1/25/13
Page
2 of 15
JAYPRO SPORTS
BBGS-18 GRAND SLAM BATTING CAGE
IMPORTANT NOTICE:
1) BEFORE EACH USE CHECK EQUIPMENT FOR PROPER CONNECTING
HARDWARE AND STRUCTURAL INTEGRITY. REPLACE DAMAGED OR
MISSING HARDWARE IMMEDIATELY.
2) USE OF THIS EQUIPMENT OTHER THAN INTENDED, MAY BE
HAZARDOUS.
3) ALTERATION OR MODIFICATION OF THIS EQUIPMENT MAY BE
HAZARDOUS AND RESULT IN INJURY. FOR REPAIR OR
REPLACEMENT, CONTACT YOUR DEALER OR JAYPRO SPORTS.
Precautions:
FOLLOW ALL INSTRUCTIONS CLOSELY. DON’T SKIP ANY STEPS, OR
OMIT ANY HARDWARE.
SELECT A CLEAR, FLAT AREA FOR ASSEMBLY.
ALWAYS BE CAREFUL WHEN USING POWER TOOLS – FOLLOW TOOL
MANUFACTURER’S INSTRUCTIONS AND SAFETY PRECAUTIONS.
ALWAYS WEAR APPROPRIATE PROTECTIVE GEAR (GOGGLES,
GLOVES, STEEL-TOED SAFETY SHOES, ETC.).
LIST OF RECOMMENDED TOOLS & SUPPLIES:
1. POWER DRILL WITH 1/8” DIAMETER DRILL BIT(S)
2. BOX WRENCHES, ADJUSTABLE WRENCHES, OR SOCKET SET
3. RUBBER MALLET AND/OR BLOCK OF WOOD
4. LEVEL
5. PHILLIPS SCREWDRIVER (OR PHILLIPS BITS FOR DRILL)
6. RAGS, GREEN SCRUBBING PADS, CLEANING SOLUTION
7. ASSEMBLE ALL TOOLS REQUIRED (PER ABOVE LIST)
8. UNPACK ALL ITEMS, MAKE SURE EVERYTHING IS RECEIVED (PER
ABOVE LIST). PICK A FLAT AREA FOR ASSEMBLY – YOU WILL
NEED AT LEAST 18’X18’ FOR FINAL ASSEMBLY, WITH AN
ADDITIONAL AREA EQUIVALENT IN SIZE FOR TEMPORARY
ASSEMBLY OF CAGE SECTIONS.