Cary Audio Design CD306SACD - Manual (Page 16)

PLAYBACK
15
NORMAL PLAYBACK
Setting the Top Priority Playback layer for Super Audio CD
• The SACD disk layer for top priority playback after the disc is loaded can be set.
• The SACD disk layer set for top priority playback upon shipment from the factory
(default setting) is the Super Audio CD (stereo) layer.
1. Press the POWER button to turn on the power.
2. Check that the disc is loaded.
• If the SACD disk layer is switched while the disc is being loaded, the playback layer
switches for that disc, but the top priority playback layer setting itself does not change.
3. Press the 2CH/MULTI CHANNEL button and switch to the layer you want to set.
• When a SACD disk is loaded after the setting has been made, the contents recorded on
the set layer are displayed.
• If a disc that does not contain the layer set for top priority playback is loaded, the
contents recorded on another layer are displayed automatically.
• This setting is stored in the memory and is not cleared even when the disc holder is
opened or closed or the power is turned off. To change the setting, repeat the
procedure above.