Cary Audio Design CD306SACD - Manual (Page 13)

CONTROLS AND DISPLAYS
12
12. DIGITAL OUTPUT JACK (COAXIAL)
• 44.1 kHz - 192 kHz digital data output from this jack.
• With Super Audio CD disks, no digital signals output.
13. DIGITAL OUTPUT JACK (AES/EBU)
• 44.1 kHz-192 kHz digital data output from this jack.
• With Super Audio CD disks, no digital signals output.
*The pin assignments of ALL of the XLR-type male analog outputs, the XLR-type male
digital output and XLR-type female digital inputs are:
Pin 1: Signal ground
Pin 2: Signal + (non-inverting)
Pin 3: Signal - (inverting)
Connector ground lug: chassis ground
Refer to your amplifier's operating manual to verify that the XLR pin assignments of its
input connectors correspond to the CD 306 SACD. If they are different, wire the XLR
cable so that the appropriate XLR output pin connects to the equivalent XLR input pin.
Pin 1: Signal ground
Pin 2: Signal + (non-inverting)
Pin 3: Signal - (inverting)
Connector ground lug: chassis ground
Refer to your digital input source signal player or other digital source's operating manual
to verify that the XLR pin assignments of its input connectors correspond to the CD 306
SACD. If they are different, wire the XLR cable so that the appropriate input pin connects
to the equivalent input pin.
Pin 1: Signal ground
Pin 2: Signal + (non-inverting)
Pin 3: Signal - (inverting)
Connector ground lug: chassis ground
Refer to your digital source's operating manual to verify that the XLR pin assignments of
its input connectors correspond to the CD 306 SACD. If they are different, wire the XLR
cable so that the appropriate output pin connects to the equivalent output pin.