Save these instructions, Safety and operating instructions, Paddle assembly – Intex EXPLORER K2 KAYAK 2014 User Manual
Page 7
(94PO) "NMMA" KAYAK ENGLISH 7.5” X 10.3” 04/23/2013
94PO
SAVE THESE INSTRUCTIONS
Page 7
1. Press and align the push-bottom on the short shaft with the paddle blade hole, ensure the
push-bottom is securely snapped onto the paddle blade hole.
2. Join the 3 shafts together with the couplers and securely tighten the coupler covers.
3. To disassemble, reverse the assembly steps. Note: is not necessary to detach the paddle blades
from the shafts.
Safety and Operating Instructions
Before Departing from the Shore or Dock
Know all required information and inform your passengers:
• Take a boating safety course and get hands-on training from your boat dealer or local boating
authorities.
• Know all local regulations and hazards related to water activities and boat operation.
• Check weather forecast, local currents, tides and wind conditions.
• Advise someone on land of the time you plan to be back at your starting point.
• Explain basic boat operation to all passengers.
• Children and non-swimmers need special instructions in the use of life jacket or personal floatation
devices (PFD).
• Be sure that one of your passengers can operate the boat in case of emergency.
• Learn how to determine the distance you can cover, and remember that bad weather conditions
can alter this.
• Review all safety requirements regularly.
Check the working condition of the boat and equipments:
• Check inflation pressure.
• Inspect the valves caps.
• Check the load is evenly distributed, fore (front) to aft (back) and side-to-side.
Paddle Assembly:
1
2
4
86"(218cm)
1
2
3
A
B
C
84"(213cm)